Yaesu FT-70DE
Handheld transceiver 144/430MHz analog FM and digital C4FM. The new FT-70DE is a compact and very attractively priced Yaesu System Fusion transceiver providing both conventional analog FM operation and the advanced C4FM Digital mode.
FT-70D C4FM/FM 2m/70cm Dual Band Handheld
Handheld transceiver 144/430MHz analog FM and digital C4FM
· compatible with System Fusion
· Digital function with AMS (Automatic Mode Select)
· sophisticated C4FM digital: Digital Group Monitor (GM), Digital Group Identification DG-ID, Digital Personal Identification PD-ID
· 5 watts of power into a compact laptop
· 700mw of power audio for clear listening
· multi-color modes indicator
· robust IP-54 (dust/water protection)
· 1,105 memory channels
· wide-band reception from 108 to 579,995 MHz
· versatile scanning functions: VFO scan programmed priority channel, memories,
· 1800mAh lithium ion battery included
· external DC power socket and battery charger
· mini-USB-socket for external memory management and software
· radio-radio cloning cable is CT-27 (optional)
· encode/decode CTCSS tones and DCS
· RF Squelch
· functions:
Automatic Power Off (APO), Transmitter TimeOut-Timer (TOT), Busy Channel Clock-Out (BCLO) the FT-70D with the AMS function identifies the type of modulation of the received signal, be it digital or analog FM C4FM, and then automatically and instantaneously the receiver to the appropriate modulation. Another feature that distinguishes the new handset is the Digital Group Monitor (GM) with implemented DG-ID (Digital Group Identification) and DP-ID (Digital Personal Identification), which simplify operations at GM. Simply put the transceiver by choosing the same DGID or DP-ID allows you to communicate between radio with the same code, are selectable codes DG-ID and DP-ID from 00 to 99, thus providing a high degree of flexibility so that the user can have Group communications with other amateur radio operators in GM mode according to their individual requirements.
Main technical characteristics:
- Power 5Watt (2/0, 5W) in broadcasting in bands 144-146MHz, 430-440MHz
- Receiving 108-579,995 MHz
- Audio output 700mW (@ 16 O 10% THD, internal speaker)
- Modulation F2D, F3E, F7W
- Dimensions 60 x 98 x 33 mm (Wxhxd) and weighs only 255gr with SBR-engine and antenna
Programmeer tip van PA3...:
Bij de software voor het programmeren staat het stapsgewijs beschreven. De installatie gaat wat "apart" maar werkt wel. Blijkbaar moet de USB poort in de FT70D in een bepaalde mode gebracht worden.
Installeer de ADMS-10 software. Deze kan gedownload worden van de Yaesu website. Hierin zitten de twee USB driver bestanden.
Haal de batterij uit de FT70DE.
Sluit de laadadapter aan op de FT70DE. In het display verschijnt "EXT DC".
Schakel de FT70D in met de powerknop op de porto.
Haal de laadkabel uit de FT70D.
Klik nu de meegeleverde USB kabel in de porto en de computer/Laptop waar de ADMS-10 software op geïnstalleerd is.
Druk nu de ADMS knop in en houdt deze ingedrukt terwijl de laadkabel weer in de porto gestoken wordt. In het display verschijnt de tekst ADMS.
Start nu de geïnstalleerde ADMS-10 software op.
Ga in de ADMS-10 applicatie naar de optie C)ommunications -> Com Port settings
Klik op Device manager. Zoek onder ' Unknown devices" de Other Devices op. Klik op Update Devices
Browse my computer for computer drivers. Zoek de plaats waar de twee Driver bestanden staan.
Als het goed is wordt er nu een driver geïnstalleerd voor de FT70D.
Nu kun je in het ADMS-10 programma onder C)ommunications een Comport kiezen die ook overeen komt met de geïnstalleerde Device driver.
De gehele handeling (in het Engels) staat in de PDF file die met de ADMS-10 software meegeleverd wordt. (Begin op pagina 6 van het document).
Merk | Yaesu |
---|---|
Specificaties | · compatible with System Fusion |